VS1 Diamond Engagement Rings

When it comes to choosing the perfect diamond engagement ring, VS1 diamonds are the safest choice. These are the highest quality diamonds that have no noticeable flaws, making them a safe choice for any bride. Plus, VS1 engagement rings are affordable, making them a great choice for first-time buyers or those who aren’t ready to spend a lot of money.

As you increase your carat weight, and inevitably the size of your diamond, more blemishes and inclusions may be visible to the naked eye. For diamonds greater than 2 Carat, we recommend looking for diamonds within the VS1 Clarity grade. Most importantly, review all potential diamonds closely to ensure that they’re eye-clean. This stone falls into the “almost flawless” or “flawless” category.

What Is A VS1 Diamond Engagement Ring?

A VS1 diamond has a few imperfections, but nothing that can’t be seen with a magnifying glass. However, it is important to note that eye-clean diamonds aren’t always better than VS2 diamonds. The clarity of a VS1 diamond isn’t as important as the carat weight or the cut of the stone. Inclusions can only be seen up close, so it is important to buy one with a high-quality lab.

A VS1 diamond will have no visible inclusions when viewed under magnification. As long as there aren’t any large or deep inclusions, a VS1 diamond is eye-clean. It’s worth noting, however, that VS1 diamonds are not as expensive as IF or FL diamonds. And because they’re eye-clean, they’re more affordable.

The VS1 diamond clarity level is the highest clarity level that is available. This clarity grade has less visible inclusions than VS2, but they are still eye-clean when viewed with the naked eye. While a VS1 diamond may be more affordable than SI1, it is still a high-quality stone that will impress your partner. The cost of a VS1 diamond can vary depending on the cut, color, and shape.

VS1 diamonds are eye-clean diamonds. While VS1 diamonds may have minor imperfections under a 10x magnification, these are invisible to the naked eye. By purchasing a VS1 diamond, you can be sure of the quality of your ring. The clarity grade of the stone will determine whether it is a good choice for an engagement ring or not. For example, a VS1 ring will have more visible flaws than a VS2 one.

VS1 Diamond Price

The price of a VS1 diamond is relatively cheap. As long as the diamond is eye-clean, you can buy a VS1 diamond. The price range for a VS1 ring will vary from $3,000 to $10,000. And you can always choose a VS1 diamond ring based on the price of the ring. The quality of a VS1 diamond will depend on the type of ring you choose for her. If you want an inexpensive option, you can opt for a VS2 ring.

For instance, this $3,280 Round Cut 0.8 Carat Diamond from James Allen is graded VS1 clarity and F color. The VVS2 clarity and F color of this Round Cut 0.8 Carat Diamond, also from James Allen, costs $3,840. VVS2 diamonds are 17% more expensive than VS1 diamonds. Both diamonds are flawless, with no imperfections or inclusions visible. The VS1 clarity will give you the same outcome in terms of attractiveness but will cost you 17 percent less.

Is VS1 A Good Diamond Grade?

VS1 and VS2 diamonds offer exceptional value and beauty, according to our many years of experience in the diamond market. We frequently advise our readers to look for VS1 or VS2 diamonds that are eye-clean. SI1 and SI2 diamonds can also be eye-clean, but you must check them carefully (or use high-quality pictures).

A VS1 diamond will appear perfect to the human eye in most situations. Because not all VS1 diamonds are created equal, it’s critical to check the stone extensively to verify that any flaws aren’t visible or can be hidden.

VS1 diamonds are also considered eye-clean. While eye-clean diamonds are not as easily noticeable under a 10x magnification, VS1s are deemed to be eye-clean. Moreover, a VS1 is an ideal choice for an engagement ring, as it is more affordable than VS2s. If you’re looking for the perfect ring for your beloved, then a VS1 is the right choice.

The GIA Diamond Clarity Grading Scale

The GIA grades Diamond Clarity on the following scale:

IF – Internally Flawless

VVS1 – Very Very Small Inclusions 1

VVS2 – Very Very Small Inclusions 2

VS1 – Very Small Inclusions 1

VS2 – Very Small Inclusions 2

SI1 – Small Inclusions 1

SI2 – Small Inclusions 2

I1 – Inclusions 1

I2 – Inclusions 2

Difference Between VS1 & VS2

When comparing VS1 vs VS2 diamonds, it’s often difficult to tell the difference, especially in weights of 1.00 – 2.00 Carats. Without magnification, an expert would have a hard time telling their grades apart. You’d need a 10x magnification tool and perhaps diamond training to detect the difference.

By definition, VS1 is a Clarity level in which tiny inclusions are detectable under 10X magnification by a skilled professional. You shouldn’t be able to spot any defects or imperfections with your naked eye without utilizing magnification devices.

At 10x magnification (a common jeweler’s loupe), VS2 clarity inclusions, on the other hand, are virtually always visible. Occasionally, the inclusion will be hidden in plain sight. In most cases, however, the addition is substantial enough to be seen under magnification immediately.

While most VS2 diamonds are eye-clean, there are a few exceptions some outliers exist, especially when it comes to larger-sized diamonds. These outliers usually barely made it past the SI1 grade and have inclusions visible to the naked eye. This is why we stress the importance of reviewing magnified photographs and videos before any purchase.

VS1 vs VS2 Diamond Clarity – Which One Should You Choose

It’s all a matter of personal taste and financial constraints.

A VS1 diamond will obviously cost more than a VS2 diamond (about 10 percent ). If you don’t have the funds for a better clarity grade, a VS2 diamond is a good alternative.

Brilliant cutting styles, such as the round cut, are more forgiving when it comes to clarity. The glitter from a round diamond will assist disguise inclusions due to the way the facets scintillate and spread light.

Step cuts, on the other hand, cannot reach the same level of optical performance as round diamonds. This is why inclusions in step cuts are simpler to detect, similar to peeking through an open window.

And as we go higher in carat size, inclusions become more obvious as the relative facet size increases. For smaller-sized diamonds (less than 2 carats), a VS1 and VS2 diamond will look just about the same and it will require a skilled eye and magnification aids to notice the differences.

If you’re stuck debating VS1 vs VS2 diamonds, look at the lower grade and see if it passes as eye-clean. Because of the slight differences between the two, and what you can save by going a grade lower, we recommend looking for eye-clean VS2 diamonds with a carat weight of less than 2.01. As you increase in carat weight, and the size of the stone, you may want to consider VS1 diamonds or even VVS2 diamonds.

What Does VS1 Diamond Clarity Mean?

By definition, VS1 is an abbreviation for Very Slightly Included. Diamonds in this clarity grade have inclusions that are very minute and somewhat difficult for a skilled grader to see under 10X magnification.

Examples of commonly found inclusions within this grade include very small feathers, clouds, white pinpoints, and small indented naturals. If you are a layperson, you will not be able to see any flaws without the use of a loupe or any magnification tools.

Are All VS1 Diamonds Eye Clean?

From a strictly technical standpoint, not all VS1 diamonds are eye-clean. It depends on who graded the work and how stringent their criteria were. For example, if the diamond is graded as a VS1 by EGL (known for their weak standards) or another dubious in-house laboratory, you have no idea what you’re getting. This diamond would almost certainly be rated as an SI1 by GIA/AGS.

If a diamond is graded as a VS1 by reputable labs like AGS or GIA, you may rest assured that it is eye-clean. As a consumer, you should only purchase diamonds that have been graded.

Should I Buy A VS1 Clarity Diamond?

Since VS1 clarity diamonds will always be eye-clean, only your budget might keep you from buying one. While VS1 clarity diamonds are ideal for engagement rings, VS2 clarity diamonds are almost always eye-clean. To the unassisted eye, even most SI1 diamonds will appear perfect. Because lesser clarity ratings mean lower prices, you may use the savings to buy a larger diamond or a more elaborate setting.

In some cases, limiting your search to lower clarity stones will keep you from finding your best options. Here are a few examples.

  • Unusual Shapes

Some diamond shapes are simply more difficult to obtain than others. If you’re looking for a trillion-cut diamond, for example, your options will be limited. The stones you do uncover may be irregularly shaped or otherwise unappealing. To select a suitable one, you’ll need to investigate trillion cuts in any clarity grade from SI2 to higher.

Rectangular cushions, pears, ovals, hearts, and marquises are all the same. Keep your clarity options open if you’re picky about the cut’s form and length-to-width (L/W) ratios.

  • Diamonds in Fancy Colors

The majority of diamonds are colorless or white in hue. A fancy colored diamond is one that has more yellow or brown than merely a tinge or any other hue, such as blue or pink. If you’re looking for a fancy hue, don’t limit your search to a specific clarity grade because they’re so rare. Choose the diamond with the nicest hue you can buy for these jewels. Concerns about clarity should be the last thing on your mind.

  • Large Sizes

In very large sizes, your options might be limited. Large diamonds are rare, so you may have trouble finding a nice one. In this case, again, don’t limit your clarity options.


VS1 diamonds are the best choice for most brides, especially for those who are looking for an affordable diamond. They don’t have the major price bump that VS2 diamonds do, and they’re still eye-clean. But they don’t have the same quality as VS1 diamonds, and the lower clarity doesn’t mean they’re not good enough for your special occasion. If you want to buy a VS1 diamond, make sure to look for a ring with even higher carat weight.VS1 diamonds are safe choices for engagement rings and diamond jewelry. They are eye-clean and offer an affordable option for shoppers who want peace of mind when it comes to diamond clarity. At the end of the day, it really boils down to your personal preferences and what you like.