VS, or very slightly included, is the third and fourth clarity grade of a diamond. This grade is the most desirable for diamonds that do not have large inclusions. These stones are highly sparkling and do not have structural problems. The inclusions do not affect the diamond’s appearance. The higher the number of VS’s, the more valuable the diamond will be. Despite this, it’s important to note that the clarity grade of a diamond is not the same as the carat weight of the stone.
The clarity grade of a diamond is also determined by the presence of visible inclusions. A diamond with a lower clarity grade is considered poor quality. Its inclusions are so small that the wearer can’t notice them. However, diamonds with higher VS and SI grades are more expensive than those with high clarity grades. Nevertheless, VS and VS2 diamonds represent the most desirable clarity grade and are often considered eye-clean.
Now the big questions that arise about VS2 Diamond are:
What Is VS2 Diamond?
On the diamond clarity grading system, a VS2 diamond is “Very Slightly Included 2.” This grade is one level below VS1 (Very Slightly Included 1) and one step above SI1 (Slightly Included 1). (Slightly Included 1).
What Is VS2 Clarity, & How Does It Work?
To understand what a VS2 diamond is, you must first understand the principles of diamond clarity. The size, number, nature, and location of any imperfections or inclusions in the diamond are measured in clarity.
As a result of the method through which diamonds are produced, almost all of them have some flaws. Diamonds are created over billions of years by a combination of heat and pressure 80-120 miles underground in the Earth’s mantle. Surface imperfections or interior inclusions are unavoidable as a result, and it’s quite rare for a diamond to emerge in immaculate form.
VS2 stands for Very Slightly Included Clarity. Inclusions in VS2 diamonds are minuscule and barely visible to the human eye, as in this 1.23ct I/VS2 Round Brilliant Cut from the Blue Nile. A VS2 rating is in the middle of the overall Diamond Clarity grading scale, but it represents a high-quality diamond that is extremely close to appearing perfect when viewed under normal lighting conditions.
The GIA’s Diamond Clarity Grading Scale
The GIA grades Clarity on the following scale:
- IF– Internally Flawless
- VVS1– Very Very Small Inclusions 1
- VVS2– Very Very Small Inclusions 2
- VS1– Very Small Inclusions 1
- VS2– Very Small Inclusions 2
- SI1– Small Inclusions 1
- SI2– Small Inclusions 2
- I1– Inclusions 1
- I2– Inclusions 2
The lower grade of the VS clarity is a VS2 diamond. Under 10x magnification (a standard jeweler’s loupe), VS2 inclusions are almost always visible. The inclusion may be in a difficult-to-find area in some circumstances. Most of the time, though, the inclusion is substantial enough to be seen under magnification fast. VS2 inclusions are rarely visible to the human eye, especially in diamonds under 2 carats.
VS2 is on the higher end of the clarity scale, but that doesn’t imply you should buy one blind. Take a look at this Blue Nile VS2 diamond. It appears to be a fantastic deal. After all, it’s $1,000 less than this diamond with the same specifications.
Is A VS2 Diamond A Good Diamond?
A VS2 clarity grading usually denotes a high-quality diamond (in terms of the number or scale of inclusions present). When buying a diamond, your goal should be to select one that is eye-clean, which means it has no visible flaws to the human eye, and many VS2 diamonds are eye-clean.
Is VS2 A Good Diamond Grade?
A VS2 clarity grading will almost always result in a high-quality diamond (at least, as its clarity is concerned). We propose that individuals look for diamonds graded VS1 or VS2, as here is where you can find a perfectly fine, eye-clean diamond for a reasonable price.
However, not all VS2 diamonds are eye-clean, so it’s crucial to scrutinize them thoroughly to ensure there are no obvious inclusions. Also, keep in mind that larger diamonds and diamonds with specific shapes, such as Asscher or Emerald Cuts, are easier to find imperfections in.
VS2 may be a tad low in some circumstances. However, for most regular-sized Round Brilliant Diamonds, this clarity grade is more than adequate.
Where Can I Purchase A VS2 Diamond?
Instead of relying solely on the grading report to determine a diamond’s clarity, it’s critical to examine it thoroughly. The nature of any inclusions can be determined by the report, but the only way to know for sure if a diamond is eye-clean is to view it personally.
You’ll need to look at high-resolution photographs to discover whether there are any flaws. We recommend buying diamonds online from James Allen and the Blue Nile, as they are the only suppliers that offer images and examination tools that are good enough to examine Diamond Clarity adequately.
What Is The Difference Between VS2 & VS1?
The difference between VS2 and VS1, there’s a lot of room for improvement.
The distinction between a VS1 and VS2 diamond is minute. It’s impossible for even a diamond expert, let alone a typical person, to discern one from the other in normal viewing conditions.
Compare this VS2 Diamond to this VS1 Diamond to discover if there’s anything that distinguishes them. It’s unlikely that you’d be able to identify which is VS1 Clarity and which is VS2 Clarity without a magnifying tool. Even then, adequate training in judging Diamond Clarity would be required to be certain.
The distinctions between VS1 and VS2 diamonds can be seen in their definitions. Inclusions are virtually always visible with 10x magnification when the clarity is VS2. A VS1 rating, on the other hand, indicates that inclusions are barely discernible.
In a nutshell, inclusions in VS2 diamonds are slightly easier to spot with magnification instruments. However, the inclusions are small and difficult to discern with the naked eye in both circumstances.
Outliers can occur in larger stones, such as 3, 4, and 5-carat diamonds, when apparent defects are obvious to the human eye for both VS1 and VS2 diamonds.
We recommend looking for eye-clean VS2 diamonds with a carat weight of 2 or less because the difference between VS1 and VS2 is minor. You won’t forego any of the attractiveness, but you will save money for other key things such as Cut quality. You may wish to select a VS1 or even a VVS2 diamond for a larger Carat stone to guarantee that it is eye-clean.
What Are Some Of The best VS2 Diamond Shapes?
Some diamond shapes are better or worse at revealing flaws than others. This is crucial to understand because a VS2 clarity rating may be ideal for one form but not for another.
Step cuts like Emerald and Asscher Cuts (as well as Baguette diamonds) are more likely to include inclusions. Long, straight, parallel facets characterize these diamond shapes, and any imperfections are visible.
Brilliant cut diamonds, such as Round, Cushion, Radiant, Oval, and Pear Shaped Diamonds, on the other hand, are known for hiding inclusions well.
In general, an eye-clean brilliant cut diamond can be found in the VS2 range, or sometimes even lower. For a step-cut diamond, such as an Asscher or Emerald, you’ll need to look higher, such as VVS2 clarity.
What Is The Price Of VS2 Diamond?
The price of a VS2 diamond is determined by several factors like the diamond’s carat weight, cut quality, color grade, and shape.
VS2 Clarity is in a sweet position where you can typically get a lot of bang for your buck. Both VS1 and VS2 diamonds have a good balance of beauty and value, so you may get an eye-clean diamond without spending more than you need to.
People frequently make the mistake of purchasing a diamond with a Clarity rating that is too high to appreciate. It’s practically impossible to distinguish the difference between diamonds of different Clarity grades once they pass the eye-cleaning barrier.
Assuming all other factors remain constant, an eye-clean VS2 diamond, such as this one from James Allen, will appear to be a Flawless graded diamond. Even though they look practically identical, there is a significant pricing difference.
To give you an idea, this Blue Nile 1.00 carat H color VVS2 clarity Cushion Cut Diamond costs $4,317. The Blue Nile also has a comparable H color, 1.01-carat diamond with a VS2 clarity rating for $3,682. The first diamond will cost 17 percent more, but when placed in a ring and seen without magnification, they will appear similar.
What Is The Ideal Clarity For A Diamond?
Flawless is the best diamond clarity (FL). A Flawless diamond, in essence, has no internal or visible flaws.
The Internally Flawless (IF) grading, on the other hand, indicates that the diamond has no internal faults but may have exterior blemishes.
But, for a diamond ring, how crucial is the Flawless or Internally Flawless grade?
The concentration of natural qualities contained in a diamond is expressed by a diamond clarity grade, which is a specified value.
When It Comes To Clarity, Why Choose GIA Certification?
A report is included with the majority of high-quality diamonds over 0.30 carats. Regardless of a certificate, some laboratories will grade diamonds higher than they should be. As a result, we recommend GIA reports (Gemological Institute of America). Their stringent grading system is well-liked. To the naked eye, GIA-certified SI1 clarity diamonds appear to be flawless. Some laboratories, on the other hand, grade worse diamonds higher.
On A Certificate, How Does Diamond Clarity Appear?
It is always a good idea to request to see the diamond certificate when purchasing a diamond. As previously said, GIA – Gemological Institute of America – is the most prestigious diamond grading laboratory.
On a diamond certificate, all of the diamond’s attributes are listed. These include anything from the stone’s carat weight to the size of the diamond table.
On rare occasions, a clarity diagram will be included on a certificate for bigger diamonds (1.00ct and up). With indications indicating the location of the diamond’s inclusions.
These will be particularly included in diamonds graded i1–i2. There are apparent imperfections and flaws.
Heavy black marks will almost certainly be among these traits. As a result, Serendipity does not sell diamonds with clarity grades lower than Si2. Unless otherwise specified.
Based On GIA Standards, Which Is The Best Diamond Color?
The Gemological Institute of America standardized that color spectrum. Each diamond is accompanied by a GIA certificate that details its color grade as well as other crucial details such as carat size and measurements.
The “best” diamond hue, according to the GIA, is D. On the clarity scale, D color diamonds are the equivalent of IF or FL grade diamonds – they’re extremely rare, and their price reflects that rarity.
Conclusion
VS2 is a diamond with slight inclusions. A VS1 is a diamond that has one or more inclusions visible with 10x magnification. An SI2 diamond is the least expensive and can’t be found any better than a VS2. If you want to buy a VS1 diamond, you should know the difference between VS. They are the most important grades in a diamond and you should be able to choose a quality ring that’s appropriate for your budget.
VS2 is a diamond with fewer inclusions than VS1. A VS1 diamond will have inclusions scattered across the diamond’s surface. A VS2 has a few larger inclusions, which will be visible with 10x magnification. A VS2 has many smaller imperfections. The lower the VS1 is, the less noticeable the inclusions. It is also easier to spot a VS1 than a VS2 one.
