White Sapphire Vs. Diamond Vs. Moissanite

If you’re planning to buy a ring, it’s essential to decide between white sapphire and diamonds. While both gemstones have a high carat weight, a diamond is still more expensive than a white sapphire. There are several differences between these two stones, though. These gems have slightly different cut grades, and the difference is often minimal.

The main difference between white sapphire and a diamond lies in their crystalline structure. Because of this, white sapphires are less susceptible to chipping than a diamond. However, unlike diamonds, sapphires have a higher density, making them less noticeable when worn as engagement rings. Another difference is that a white stone is cheaper than a diamond, and it has a larger crystalline structure than a diamond.

The price of white sapphire is higher than a diamond, and the rarity, size, and quality of a white sapphire will determine how much it will cost. Even though Moissanite has a high clarity rating, it is not nearly as durable as a diamond. However, it is the best option for those who prefer a more understated engagement ring. However, Moissanite may be a better option if you prefer a visible stone.

White Sapphire

White sapphires have a Moh’s hardness rating of 9, placing them in the top three hardness categories. Although sapphire is not as hard as diamond or Moissanite, it is still one of the most durable gemstones. It’s a fantastic choice for anyone looking for a natural stone (rather than a cultured lab-grown stone). White sapphire is also a very cost-effective gemstone. The most prominent white sapphire gems available today come from Sri Lanka and are known as “Ceylon white sapphires.” White sapphire is suitable for Tula (Libra) and Vrishabha (Taurus) Rashi. Western astrology considers white sapphire suitable for Cancer. The ascendants of Gemini, Virgo, Capricorn, and Aquarius can also wear white Pukhraj.

Many other names for white sapphire exist, including ‘Shvet Pukhraj’ (Sanskrit), ‘White Pukhraj’ (Hindi), and ‘Leuco Sapphire’ (English). White sapphire is found in Myanmar, the Czech Republic, Brazil, Kenya, India, Australia, and Sri Lanka and produces the best quality.

Even though sapphire is a tough mineral, it can show wear after years of regular use. It depends on how rough you are on your hands or whether you take care to remove your ring before engaging in certain activities. Sapphires can develop a “frosted” appearance over time as the facets’ tiny edges wear away. There are a variety of other clear/white minerals that are frequently used as engagement ring substitutes. White zircon, white topaz, and cubic zirconia (CZ) are frequently mistaken for diamonds, Moissanite, and white sapphire. Why not use them because they’re so cheap? I wouldn’t recommend topaz, zircon, or CZ is durability. On the Moh’s Scale, CZ is an 8-8.5, topaz is an 8, and zircon is only a 6-7.5. All will quickly show wear, such as scuffing (which gives the stone a frosty/milky appearance) or, even worse, chipping, breaking, or cracking.


White Sapphire stone price in India varies from Rs 1500 per carat ($20 approx.) and can go as far as Rs 70,000 per carat ($1000 approx.) plus. Generally, the value of white sapphire is determined by analyzing its Origin, Color, Clarity, Carat Weight, and Cut.


The world’s largest natural white sapphire mines are in Sri Lanka. Due to its exceptional clarity and large size, Sri Lankan or Ceylonese white sapphire is the most expensive, and Burmese and Thai sapphires are typically off-white and cost less.


Almost 75% of white sapphire gems produced are pale brown or muddy, and only 10% of the remaining 25% are gem quality. So it is difficult to find a cheaper natural white sapphire that is eye clean, and they are usually more expensive than stones with milky clouds of color tints.


Safed Pukhraj is likely to have flaws, and its transparency, inclusions, and surface blemishes determine its clarity. The more minor inclusions, the more valuable the white sapphire natural stone.


White sapphires are highly sought after in the market due to their brightness and ability to conceal visible inclusions. Round or oval white sapphires are cheaper than square or other custom shapes because cutting oval and round gems involve less waste.


Diamonds are the hardest mineral on the planet, with a Moh’s hardness rating of ten. (For more information on the scale, see my blog post on the Mohs and stone durability.) For an everyday ring, that. Will wear for years; hardness is essential. Diamonds also have a lot of fire and brilliance, which gives them that dazzling sparkle we all know and love. They sparkle even when dirty because of their incredible ability to reflect light up to our eyes. In an ideal world, your rings would always be clean, and you would remember to take them off every time you washed your hands. However, soap scum, water residue, lotions, and other substances will cause gunk to build up behind your stone. Diamonds are so good at creating sparkle that they don’t even need a clean background. A clean diamond will shine even brighter, but a dirty diamond will still gleam. As I like to say, a diamond can even sparkle in a dark room.

Diamonds are available in various qualities, including clarity and color grades. I usually stick to the VS-SI clarity and D – H color ranges for my clear/white diamonds. This translates to diamonds with exceptional clarity and colorless to near-colorless Color. The disadvantage is that mined diamonds, especially high-quality ones, are expensive. They’re also mined from the ground, which some customers might prefer to avoid. Though we’ve come a long way in terms of ethical diamond mining, there are still a lot of problems.


According to diamonds, a 2 carat diamond from your local jewelry store or online retailer can cost anywhere from $5,000 to $60,000 or more. Pro. While these figures may shock you, the vast price difference is the diamond’s shape, cut quality, clarity, and Color. Furthermore, as the carat size grows larger, so does the stone’s rarity. As the carat weight of a diamond increase, its price rises exponentially.

You get what you pay for when it comes to quality. For example, near the top of the spectrum, there are stunning 2-carat diamonds that check all the boxes of the four c’s, and near the bottom of the spectrum, there are poorly cut, dull 2-carat diamonds that will cost you significantly less.

“Because no two diamonds are the same, we recommend evaluating the four cs of diamond quality for each stone you look at,” says Diamonds. Pro. When it comes to a larger stone like a 2-carat diamond, focusing on quality over specific carat weight will get you the most beauty for your money.”


The most crucial diamond characteristic most readily impacts a diamond’s beauty. Look for high levels of brilliance and fire, and be willing to reduce your spending in other areas like Clarity or Color to ensure an exceptional Cut.


The second most crucial aspect to focus on. A diamond should look white or colorless to the naked eye. Ensure the Color does not distract or interfere with white and colored light reflection.


The third most important characteristic on the list. Choose an eye-clean diamond. Blemishes and inclusions should not distract from the brilliance or fire.


Last but not least. How you balance out the other 3 C’s will determine how large of a diamond you will be. If you balance everything perfectly, you will get the largest possible diamond in your budget that looks fantastic.

Remember that a diamond is a precious whole and should be looked at in totality with these fundamentals in mind. The four main qualities of a diamond play an essential role in how the diamond looks.


Moissanite, like a diamond, is a lab-created gem, but it has a different molecular makeup. It resembles a diamond in appearance and behavior, but it differs slightly. (If you’re not sure what Moissanite is, go to Charles & Collard’s website first; they’re the creators of the Forever One TM and Moissanite’s originators.) Moissanites come in colorless and near-colorless varieties with eye-clean clarity, so they’re very similar to the high-quality diamonds I use in terms of clarity and color. Even in a dark room or when your ring isn’t freshly cleaned, Moissanites sparkle as brightly as diamonds. Their tenacity is second only to diamonds, and they are one of the world’s most complex materials (even more complicated than sapphire or ruby).

It’s an ethical choice because it’s also a created gem, which means it’s free of environmental and social issues. The Moissanite from Charles & Collard is made in the United States and certified. Moissanite is a white gemstone that closely resembles a diamond in appearance and behavior, and diamond and Moissanite are usually indistinguishable when viewed side by side.


1 Carat Moissanite Cost

Let’s explore the cost of a 1-carat moissanite compared to a 1-carat diamond. As a guide, you can expect to pay around $5000 for a nearly colorless 1-carat diamond, but completely colorless Moissanite will cost you significantly less at around $600.

2 Carat Moissanite Cost

The typical cost of a 2-carat moissanite engagement ring would be approximately $1200, and a 3-carat moissanite cost price would be approximately $3000. The price continues to rise for heavier carat weights.


Some gems have yellow or green tones, but the colorless gems are brilliantly clear. Moissanite is evaluated and then classified using the following grading system:

Colorless grades D, E, and F

G, H, and I grades are nearly colorless.

Colors tones are present in grades J and K.The higher the grade if the stone is more colorless, similar to a natural or lab diamond color grading system. As a result, Moissanite with grades of D to F will be more costly. It is based on the following factors that affect light performance: polish and symmetry. An ideal cut proportion must meet depending on the moissanite shape. Fair & Poor, Good, Very Good, and Excellent is the cut grades. The more brilliant the stone, the higher its cut grading will be.

Weight In Carats

Carat weight is also a factor; the higher the carat weight, the more expensive the gemstone. Because a carat refers to a diamond’s weight, the measurement in millimeters of a diamond or Moissanite can vary depending on how it’s cut.

Choose Moissanite with a “Very Good” cut. These gemstones have a shallower depth and a wider spread, and this means their dimensions are more significant, giving the stone a more prominent appearance than its carat weight.


When it comes to clarity, the fewer inclusions, the better. The more sparkle and light performance, the better the clarity. These flaws are referred to by a variety of technical terms, such as blemishes and inclusions, by gemologists. Because these flaws are usually microscopic, they have little impact on a diamond’s beauty.

White Sapphire Vs. Diamond Vs. Moissanite

Yet another distinguishing feature of diamonds, as opposed to sapphires, is the Color of their stones. While diamonds are the hardest gemstone, Moissanite is the softer of the two. As opposed to a diamond, a white sapphire will not sparkle as brightly or at all as a diamond does. While Moissanite is less expensive than diamond, it does not sparkle quite as brightly. You might want to think about Moissanite as an alternative to diamonds if you’re in the market for a wedding band.

Although a white sapphire is more affordable than a diamond, you should still consider the cost. A diamond is approximately three times more expensive than a white sapphire, and it is three times more expensive than Moissanite, among other things. You’ll want to make sure the stone is the correct size before purchasing it. If you’re thinking about getting her an engagement ring, white sapphire is an excellent choice.

Each gemstone is an entirely distinct mineral, with its chemical composition and inherent characteristics. All of the stones are transparent, and the characteristics of each can be strikingly similar in some cases or utterly different in others. It can be deceiving to see a clear gem and assume that it will have the same properties as a diamond (the stone you’re most familiar with). Before deciding which stone is suitable for you, it’s essential to understand the critical differences between diamonds (mined and lab-grown), Moissanite, and white sapphires. This post will include some facts, photos, and personal opinions — because, after all, what’s the fun in facts and photos if I can’t throw in a little personal opinion here and there.

Women’s 14k white gold 2 Carat Princess Cut White Sapphire engagement ring

Amazon button


The Princess Cut 4-prong engagement ring is custom-made to order. The ring has a natural 2 carat White Sapphire Center measuring 7mm square. The White Sapphire is natural, not man-made
  • princess-cut white sapphire ring
  • custom engagement ring
  • white gold engagement ring
  • hand made engagement ring

How Long Do They Last?

Diamonds, Moissanite, and sapphires are excellent for every day jewelry such as engagement rings and wedding rings.

The most challenging natural material is diamond. A diamond is a 10, Moissanite is a 9.25, and sapphire is a 9. On the Mohs hardness scale, a diamond is a 10, Moissanite is a 9.25, and sapphire is a 9. However, due to the non-linear nature of this scale, the difference between a nine and a ten means that diamonds are 3 to 4 times harder than sapphires. Hardness is a measure of a mineral’s resistance to scratching and abrasion. Moissanite or sapphire can scratch a diamond, but a sapphire can scratch Moissanite. A diamond is the only substance capable of scratching another diamond. A sapphire engagement ring is more likely to experience abrasion after many years of daily wear than a diamond engagement ring.

Is Moissanite More Valuable Than White Sapphire?

In comparing prices, White Sapphire is the less expensive of the two options. A one-carat White Sapphire costs around $450 right now, and a one-carat moissanite costs around $600. It’s worth noting that most sapphires must be treated or bleached to become nearly colorless.

Moissanite Or Diamond: Which Is Better?

Moissanite has a higher brilliance than diamonds in general. “It has more fire and brilliance than any other gemstone, which means it sparkles more,” O’Connell explains. “Moissanite is cut differently than diamonds to enhance the sparkle because it is double refractive.”

What Stone Is Closest To A Diamond?

Moissanites or white sapphires are most comparable to a diamond. While visible differences exist, these gems will look the closest to a diamond while offering a more affordable price. These stones are also high on the Mohs scale of relative hardness, making them suitable for everyday wear.

Why Is My White Sapphire Cloudy?

Over time, any gemstone will collect residue from makeup, lotion, household cleaners, and daily exposure to the elements. Because of their colorlessness, white gems like white sapphires tend to get cloudy faster than colored gems.

How Can You Tell Moissanite From A CZ?

The main differences between Moissanite and Cubic Zirconia are: Moissanite is made of silicon carbide, whereas cubic zirconia is made of zirconium dioxide. Moissanite diamonds are generally harder at 9.5 on a 10 point scale, whereas cubic zirconia is 8.5 on the hardness scale.


While a diamond is more expensive, white sapphire is a less expensive alternative. Although price is not the most crucial consideration, consulting with an expert can help you select the ideal stone for your ring. A white sapphire ring might be the best option if you’re unsure which one is right for your ring. You will save money on a white sapphire if you choose the latter.

Moissanite is a slightly more durable gemstone than diamond, the hardest mineral on the planet, and it can withstand up to 52.1 gigapascals of pressure. While the diamond is still the most valuable gem, it is not as hard as the white sapphire. It is, however, less expensive than a diamond due to its hardness.